Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL

2020-02-06 18:22:44

字体：大中小

来源：转载

供稿：网友

apache+jserv+ojsp+ssl+php(imap+ldap+mysql) install guide

在参考java区netsoldier的"jsp已经稳定运行起来"
和laomie的gnijsp的安装,配置两篇文章
经过2天的不懈奋斗，终于可以正常工作了。:)

感谢两位前辈!

现把安装过程简略描述如下,和大家共享喜悦。

ps1:os环境:redhat  6.2  kernal:2.2.14-5
       mem:256mb

ps2:我的php4,jserv都是编译进apache的
     没有采用mod方式.

前期准备:

软件:
apache  部分:
apache  1.3.12                http://www.apache.org
apache  jssi  1.1.2        http://java.apache.org
apache  jserv  1.1.2      http://java.apache.org

ssl  部分:
mod_ssl-2.6.0-1.3.12  http://www.modssl.org/source/mod_ssl-2.6.0-1.3.12
.tar.gz
mm-1.0.9                          http://www.engelschall.com/sw/mm/mm-1.0.9.tar.gz

rsaref2.0                        ftp://ftp.replay.com/pub/crypto/crypto/libs/rsare
f20.tar.z
openssl  0.9.4                http://www.openssl.org/source/openssl-0.9.4.tar.g
z

php  部分:
php  4.0.1pl2                  http://www.php.net/do_download.php?download_file=
php-4.0.1pl2.tar.gz&source_site=www.php.net
libwmf  0.1.7                  http://www.csn.ul.ie/~caolan/publink/libwmf/libwm
f-0.1.17.tar.gz
freetype  1.3.1              ftp://ftp.freetype.org/pub/freetype1/freetype-1.3
.1.tar.gz
zlib  1.1.3                      http://www.cdrom.com/pub/infozip/zlib/zlib.tar.gz

pdflib  3.0                      http://www.pdflib.com/pdflib/download/pdflib-3.0.
tar.gz
openldap  1.2.8              ftp://ftp.openldap.org/pub/openldap/openldap-rele
ase/openldap-1.2.8.tgz
imap  4.5                          http://hkstar.linuxberg.com/files/console/imap-4.
5.tar.z

java
jdk  1.2.2                        http://java.online.sh.cn/jdk/sun/linux/jdk1_2_2-l
inux-i386.tar.gz
jsdk  2.0                          http://java.sun.com  选择  solaris  and  other  unix
jswdk  1.0.1                    http://java,sun.com  选择  solaris  and  other  unix
ojsp                                  http://technet.oracle.com  搜寻  ojsp_10061.otn.zip

安装:
apache+jserv+php:
由于这些东西的参数较多
我采用每个建立一个cfg脚本配置，不用每次重新配置都要敲入所有配置参数:)

步骤：

拷贝所有的包到/tmp下面，然后按步骤解开压缩包，最方便的是用mc来拷贝:)
注意:以下路径均为我本机的路径,以mc操作，后面的配置文件也以此为参考
         mc可以直接进入tar以及gz包,然后就可以直接f5(copy)了。

#  mc  (change  left  win  to  /tmp,right  to  /opt/install)
01.  mm-1.0.9.tar.gz                                          to  /opt/install/lib/mm/mm-1.0.
9
02.  rsaref20.tar.z                                            to  /opt/install/lib/rsa/rsaref
20
03.  openssl-0.9.4.tar.gz                                to  /opt/install/lib/openssl-0.
9.4
04.  mod_ssl-2.6.0-1.3.12.tar.gz                  to  /opt/install/apache/mod/mod
_ssl-2.6.0-1.3.12

05.  openldap-1.2.8.tgz                                    to  /opt/install/ldap/openldap-
1.2.8
06.  imap-4.5.tar.z                                            to  /opt/install/mail/imap-4.5

07.  pdflib-3.0.tar.gz                                      to  /opt/install/pdf/pdflib-3.0

08.  zlib.tar.gz                                                  to  /opt/install/pdf/zlib-1.1.3

09.  libwmf-0.1.17.tar.gz                                to  /opt/install/lib/wmf/libwmf

10.  freetype-1.3.1.tar.gz                              to  /opt/install/lib/freetype.t
tf/freetype-1.3.1

11.  jdk1_2_2-linux-i386.tar.gz                    to  /usr/local/jdk1.2.2
12.  jsdk20-solaris2-sparc.tar.z                  to  /usr/local/jsdk20
13.  jswdk1_0_1-solsparc.tar.z                      to  /usr/local/jswdk-1.0.1
14.  ojsp_10061_otn_zip                                    to  /usr/local/ojsp

15.  apache_1.3.12.tar.gz                                to  /opt/install/apache/apache_
1.3.12
16.  apachejssi-1.1.2                                        to  /opt/install/apache/apachej
ssi-1.1.2
17.  apachejserv                                                  to  /opt/install/apache/apachej
serv-1.1.2
18.  php-4.0.1pl2                                                to  /opt/install/php/php-4.0.1p
l2

配置文件
注意:没有特别说明的就是用的缺省的configure没有任何参数。
         所有cfg文件都需要由执行属性。

[[email protected]  install]#  cat  /opt/install/php/php-4.0.1pl2/cfg
./configure  /
   --enable-force-cgi-redirect  /
   --with-apache=../../apache/apache_1.3.12  /
   --with-pdflib=/usr/local  /
   --with-zlib-dir=/usr  /
   --with-jpeg-dir=/usr/local  /
   --with-tiff-dir=/usr/local  /
   --with-mysql=/usr/local/mysql  /
   --without-gd  /
   --enable-magic-quotes  /
   --disable-debug  /
   --enable-ftp  /
   --with-dbase  /
   --with-zlib=/usr  /
   --with-imap=/usr/local/imap  /
   --with-ldap  /
   --with-java=/usr/local/jdk
#    --with-servlet=/usr/local/jsdk  /
(上面一行千万不要加,我开始加的,php可以编译通过不过无法河apache整合)

[[email protected]  install]#  cat  lib/mm/mm-1.0.9/cfg
./configure  --disable-shared

[[email protected]  install]#  cat  lib/openssl/openssl-0.9.4/cfg
./config  /
         --prefix=/usr/local/openssl  /
         --openssldir=/usr/local/openssl  /
         -l`pwd`/../../rsa/rsaref2.0/local  rsaref  /
         -fpic

[[email protected]  install]#  cat  apache/apachejserv-1.1.2/cfg
#!/bin/sh
./configure  /
   --prefix=/usr/local/apache/jserv  /
   --with-apache-src=../apache_1.3.12  /
   --with-logdir=/usr/local/apache/log  /
   --enable-eapi  /
   --with-jdk-home=/usr/local/jdk  /
   --with-jsdk=/usr/local/jsdk/lib/jsdk.jar  /
   --disable-debugging

[[email protected]  install]#  cat  apache/mod/mod_ssl-2.6.0-1.3.12/cfg4
#!/bin/sh
./configure  /
   --with-apache=../../apache_1.3.12  /
   --with-ssl=/usr/local/openssl  /
   --with-rsa=../../../lib/rsa/rsaref2.0/local  /
   --with-mm=../../../lib/mm/mm-1.0.9  /
   --prefix=/usr/local/apache  /
--disable-rule=ssl_compat  /
--enable-rule=ssl_sdbm  /
--enable-rule=ssl_experimental  /
--enable-rule=ssl_vendor  /
--activate-module=src/modules/php4/libphp4.a  /
--activate-module=src/modules/jserv/libjserv.a

编译安装:

步骤:

#  ln  -s  /usr/local/jdk1.2.2          /usr/local/jdk
#  ln  -s  /usr/local/jsdk20              /usr/local/jsdk
#  ln  -s  /usr/local/jswdk-1.0.1    /usr/local/jswdk
#  ln  -s  /usr/local/jdk1.2.2/jre  /usr/local/jre
#  vi  ~/.profile
   添加  classpath  环境变量

jdk_lib=/usr/local/jdk/lib
jsdk_lib=/usr/local/jsdk/lib
jswdk_lib=/usr/local/jswdk/lib

classpath=$jdk_lib/rt.jar:$jdk_lib/tools.jar:$jsdk_lib/jsdk.jar:$jswdk
/lib/servlet.jar:$jswdk/lib/jspengine.jar:$jswdk_lib/xml.jar
classpath=$classpath

export  classpath
export  classpath

path  /usr/local/jdk/bin:$path

export  path

#  .  ~/.profile

注意:最好不要用系统安装的kafee，移除/usr/bin/java*  /usr/bin/jar

附加应用:
(在刚才展开的几个源码目录下面运行./cfg,或者./configure,然后编译安装)

01.  openldap-1.2.8
02.  imap-4.5
03.  zlib-1.1.3
04.  libwmf-0.1.17
05.  freetype-1.3.1
06.  pdflib-3.0

ssl相关应用:
(在刚才展开的几个源码目录下面运行./cfg,或者./configure,然后编译安装)

07.  mm-1.0.9
08.  rsaref20
09.  openssl-0.9.4

apache+jserv+jssi+php4:
(所有动作均在各自源码目录下面)

10.  先在apache_1.3.12的源码目录下面以./configure  --prefix=/usr/local/a
pache  配置一下
11.  然后配置apachejserv-1.1.2  make;make  install;

12.  php-4.0.1pl2
       ./cfg;make;make  install

13.  mod_ssl-2.6.0-1.3.12.tar.gz
       ./cfg;

14.  apache_1.3.12
       make;make  install;

15.  按照apachejssi的说明修改/usr/local/apache/jserv/etc/jserv.conf,以及
拷贝apachejssi.jar
       到/usr/local/apache/jerv/libexec下面

16.  按照ojsp的说明(在/usr/local/ojsp/index.htm)修改
       /usr/local/apache/jserv/etc/jserv.conf
       和
       /usr/local/apache/jserv/etc/jserv.properties

17.  在  /usr/local/apache/conf/httpf.conf  中添加
       include  /usr/local/apache/jserv/etc/jserv.conf

上一篇：Linux 下的 Apache+JServ+ojsp+SSL+PHP(IMAP+LDAP+MYSQL

下一篇：PHP安装攻略:NT+Apache+PHP3